The Steinel 34870 HG 2310 programmable heat gun with LCD display emits airstreams from 3.6 to 17.6 cubic feet per minute (CFM) at temperatures ranging from 120 to 1,200 degrees F. The gun’s temperature setting can be changed in increments of ten degrees F, and the airflow can be varied in ten settings. Similar in shape to a hair dryer, the gun has four preset temperature and airflow settings that can be programmed for frequent applications, a cool air stage, and an LCD that displays airflow, temperature setting, and actual output temperature. Each coil in the heating element is encapsulated in ceramic to extend coil life and provide even heat. This heat gun is suitable for many applications from soldering and desoldering, applying shrink tubing, and creating and repairing wiring harnesses to plastic welding, leather and vinyl repair, and shaping prosthetics and orthotics.
Specifications
| Heating Element | Ceramic encapsulated to resist coil breakage |
| Weight | 2.20 lb. |
| Dimensions | 8.0 x 10.2 x 3.5 inches (H x W x D). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) |
| Variable Airflow | 3.6 to 17.6 CFM |
| Variable Temperature | Selectable from 120°F to 1,200°F (49°C to 649°C) |
| LCD Display | Indicates actual and target temperatures in 10°F increments. |
| Power Cord | Double insulated, industrial grade rubber, length: 6 ft. |
| Output | 1,600 watts. |
| Voltage | 120 VAC / 60 Hz at 12.5 amps |
| Certifications | UL / C-UL listed |
| Warranty | One year limited |
| Nozzle Diameter | 1.30 inches (33.02 mm) |
| Programs | Four customizable pre-set temperature/airflow programs |
| Switch | Cool air stage, variable temperature & airflow |
Heat guns are hand tools that emit a stream of heated air at variable temperatures up to 1,300 degrees F (700 C). Most guns have an electrical heating element to control output temperatures and adjustable fan motors to regulate and focus airflow. Heat guns with high airflow output (greater than approximately 20 cubic feet per minute) are sometimes called heat blowers. Heat guns can be used for a variety of applications ranging from copper and plastic welding to touching up shrink wrap. Accessory nozzles (sold separately) are used to shape the air stream over a wider area, or direct it around pipes and tubing for even heating which prevents adjoining surfaces (such as panes of glass) from overheating, and some heat gun models incorporate workbench stands to allow hands-free operation.
Steinel manufactures heat guns, glue guns, gas torches, and sensors. The company, founded in Germany in 1959, meets International Organization for Standardization (ISO) 9001:2008 standards and is Restriction of Hazardous Substances (RoHS) compliant.
- 120V heat gun with temperatures that can be changed in 10 degree increments from 120 to 1,200 degrees F
- Continuously variable airflow from 3.6 to 17.6 cubic feet per minute (CFM) with ten settings
- Four preset programmable temperature and airflow settings with lockable control for frequent heating applications
- Heating element with ceramic encapsulation on each coil to extend coil life and provide even heat
- LCD indicates actual and target temperatures
Няма коментари:
Публикуване на коментар